Motorola Canopy Systems from Continental Wireless

2.4 GHz Access Point Modules

 

2450AP - 2.4 GHz MHz Advantage Access Point Module

Description 2.4 GHz Advantage Access Point Module
Canopy Part Number 2450AP
Signaling Rate 10 Mbps
Typical LOS Range 5 Mi (8 km)
Typical Aggregate Useful Throughput 7.0 Mb
Frequency range of band ISM 2400-2483.5 MHz
Non-overlapping Channels 3
Channel Width 20 MHz
Channel Spacing every 2.5 MHz
Modulation Type High Index 2-level Frequency Shift Keying (FSK) optimized for interference rejection
Encryption DES capable
Latency 5 - 7 msec
Carrier to Interference ratio (C/I) <3 dB
Nominal Receiver Sensitivity (dbm typical) -86
Antenna Gain (dB) 8
EIRP (dB) Adjustable
Equivalent Isotropic Radiated Power (EIRP) Adjustable from 10 mW to 2.0 W
DC Power (typical) 0.3 A @ 24 VDC = 7.2 W
Antenna Beam Width 3 dB antenna beam width 60 degrees, Azimuth and Elevation
Temperature -40° C to +55° C (-40° F to +131° F)
Wind Survival 190 km/hr (118 miles/hr)
Dimensions 11.75 in H x 3.4 in W x 3.4 in D (29.9 cm H x 8.6 cm W x 8.6 cm D)
Weight .45 kg (1 lb)
Access Method Time Division Duplexing/Time Division Multiple Access (TDD/TDMA)
Interface 10/100 Base T, half/full duplex. Rate auto negotiated (802.3 compliant)
Protocols Used IPV4, UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP
Network Management HTTP, TELNET, FTP, SNMP Version 2c

Copyright © 2004 - 2005 - 2006 Continental Wireless, Inc. - Domestic/International Wireless-Solutions - Home

Call (800)527-2000 or email Continental with your system requirements for a free quotation