Motorola Canopy Point-to-Multipoint Solutions from Continental Wireless

Backhaul Systems - PMP Access Points - PMP Subscriber Modules - System Components - Pricing

The Canopy System

The Motorola Canopy system provides cost-effective high-speed Internet access to residential and business customers alike. The Canopy family of products can help service providers deliver broadband service to local customers as well as improve the utilization of their existing network. The Canopy broadband wireless platform is highly scalable and exhibits low susceptibility to interference requiring no elaborate frequency planning and coordination.

The Canopy hardware draws little power, and its packaging is unobtrusive. The equipment uses antennas of only moderate gain resulting in minimal requirements for aiming the units. Hence, installation is easy, in contrast to many of the higher frequency solutions currently available. Finally, the built-in visual feedback installation indicators allow the unit to be installed by virtually anyone. These characteristics facilitate initial deployment and network expansion as capacity needs increase.

The system has application for serving enterprise properties, such as schools, municipalities, hospitals, and small business campuses. It is also an excellent system for serving residential single family and multi-family housing units with users experiencing data rates in excess of 6 Mbps per subscriber. The Canopy system enables broadband access deployment with a wireless point of presence that can be connected directly to broadband infrastructure or indirectly via a wireless backhaul link to fiber or microwave network infrastructure.

Canopy Technology in a Point-to-Multipoint Configuration

A wireless access point can contain anywhere from one to six Canopy sector transceiver's. Each transceiver delivers 10 Mbps connectivity with up to 200 subscribers per sector, ensuring omnidirectional coverage within a two-mile radius. Six transceivers have an aggregate capacity of 60 Mbps. To increase capacity beyond 60 Mbps, additional transceivers can be easily co-located on an access point resulting in up to 12 overlapping sectors for aggregate data rates up to 120 Mbps. Transceivers interface with the network infrastructure routers and the subscriber computers via 10 or 100 baseT auto sensed Ethernet.

Canopy Technology in a Point-to-Point Configuration

Benefits of the Canopy System

The Motorola Canopy Wireless Internet Platform delivers a telecommunications link that supports high speed data throughputs while requiring significantly reduced capital investments and lower deployment costs than other broadband technologies.

Benefits include:

• Reliability and Availability – The Canopy system is designed around the philosophy of inexpensive hardware with redundancy where needed. This allows the Canopy system to be a very cost-effective yet highly reliable/available solution.

• Quality of Service and Capacity -- Ensuring that bandwidth is available for a range of data services to all subscribers is an essential requirement. The interference rejection characteristics of our system allow Motorola to provide aggregate system capacities that are far greater than the signaling rates alone might indicate.

• Security and Authentication – Privacy and integrity of data are key considerations of broadband subscribers. Security and authentication to prevent unwanted access to critical data or services are necessary for any broadband system. Canopy uses industry proven authentication and encryption technologies to ensure that the service provider maintains control of the network.

• Mitigation of Interference – As wireless broadband services become more widespread and unlicensed spectrum becomes more crowded, coexistence or mitigation of signal interference becomes a greater consideration. The underlying modulation scheme used by the Canopy system provides one of the best interference rejection systems available and far surpasses the performance of competing technologies in the unlicensed band.

• Reduced Installation & Deployment Costs and Time -- Network service providers have faced significant challenges in reducing wiring and installation costs in deploying complex systems. The Canopy technology easily supports network configuration changes on either a permanent or temporary basis.

• Reduced Customer Support Costs -- Service outages and customer calls can rapidly drive up operating costs. Canopy utilizes effective network management tools and detects system outages to minimize these costs.

Discount Pricing:

Continental offers discount pricing on all Canopy components, if you cannot find what you are looking for below, contact Dave Hang, or Jay Clark for additional information.

Canopy Backhaul Systems

Motorola Canopy Backhaul Modules, 10/100 baseT, half/full duplex; rate auto negotiated (802.3 compliant). Two units are required for a complete link and Power Supply, Surge Suppressors and Mounting Brackets are sold separately

PN

Description

2400BH - HK1069A

2400BH - 2.4 GHz MHz Backhaul Module - 10 Mbps

2400BHRF - HK1070A

2400BHRF - 2.4 GHz MHz Backhaul Module - 10 Mbps with Reflector

2400BH20 - HK1071A

2400BH20 - 2.4 GHz MHz Backhaul Module - 20 Mbps

2400BHRF20 - HK1072A

2400BHRF20 - 2.4 GHz MHz Backhaul Module  20 Mbps with Reflector

5200BH - HK1035A

5200BH - 5.2 GHz 10 Mbps Backhaul Module

5210BHRF - HK1085A

5210BHRF - 5.2 GHz Extended Range Backhaul Module - 10 Mbps with Reflector

5210BHRF20 - HK1087A

5210BHRF20 5.2 GHz Extended Range Backhaul 20 Mbps with Reflector

5700BHRF - HK1026A

5700BHRF - 5.7 GHz Backhaul Module - 10 Mbps - with Reflector

5700BH20 - HK1162A

5700BH20 - 5.7 GHz Backhaul Module - 20 Mbps

5700BHRF20 - HK1036A

5700BHRF20 - 5.7 GHz Backhaul Module - 20 Mbps - with Reflector

Point-to-Multipoint Systems - Access Point Modules

PN

Description

MSRP

9000AP -HK 1105A

9000AP 900 MHz Access Point Module

$1,905.00

9000APC -HK 1107A

9000AP 900 MHz Access Point Connectorized (External antenna)

2400AP - HK1068A

2400AP - 2.4 GHz MHz Access Point Module

2450AP - HK1125A

2450AP - 2.4 GHz MHz Advantage Access Point Module

5200AP - HK1023A

5200AP - 5.2 GHz MHz Access Point Module

5250AP - HK1124A

5250AP - 5.2 GHz MHz Advantage Access Point Module

5700AP - HK 1025A

5700AP - 5.7 GHz MHz Access Point Module

5750AP - HK 1128A

5750AP - 5.7 GHz MHz Advantage Access Point Module

Point to Multipoint Systems - Subscriber Modules

PN

Description

9000SM - HK 1101A

9000SM - 900 MHz Subscriber Module

9000SMC - HK 1103A

9000SMC - 900 MHz Subscriber Module - Connectorized

2400SM - HK1067A

2400SM - 2.4 GHz MHz Subscriber Module

2450SM - HK1138A

2450SM - 2.4 GHz MHz Advantage Subscriber Module

5200SM - HK1022A

5200SM - 5.2 GHz MHz Subscriber Module

5250SM - HK1137A

5250SM - 5.2 GHz MHz Advantage Subscriber Module

5700SM - HK 1024A

5700SM - 5.7 GHz MHz Subscriber Module

5750SM - HK1136A

5750SM - 5.7 GHz MHz Advantage Subscriber Module

System Components / Accessories

PN

Description

1008CK-2 - HK1029A

 Cluster Management Module (CMM)

1070CK - RDH4370A

Cluster Management Module Micro (CMMmicro)

RRDN5536A

RRDN5537A

ACPS110-03

RDN9722A

110 VAC Single Module Power Supply ( U.S, NOM, & Canada)